Tactical TAC21 Part 2

ambrose-1106Man!  When you need a chassis to deploy, MDT has it for you.  Check out this review!

It has taken me three days to get into position.  Sometimes getting to a target is the hardest thing, but who volunteered for this?  Of course me!  Once I hit my spot, I went ahead and set up my bi-pod and scoped out the distance.  Once this was all done, I waited for my target.  One thing about laying out here was whether or not you are “one” with your rifle.  I was not using a standard rifle, I customized my rifle with a Rem 700 and of course the TAC21 rifle Chassis.  This chassis is amazing when it comes to Chassis.  The TAC21  allows your barrel to free float so that you can get the maximum effective accuracy in each round.  One of the best thing you can do with this chassis is remove the butt stock so you can even customize it even more!!  Yes they do sell some, but it also allows you to put whatever you like.


Sorry, I got carried away, but to put a long story short, the target came into my window of opportunity and I took the shoot.  Once, the target was down, I back down the hill I was laying on and high tailed it out of there.  Made my way to my extraction point,  it was an old rock house.  I took off the ghillies suit and set up my hide at the back of the house and placed my rifle through the window.  Job well done and out of here!

One of the most important thing in the Sniper, EDM & DDM world is your rifle.  So, building my rifle using the TAC21 chassis has given me everything I need whether in the Military or civilian.  (Check out Part 1 here)  Once I had my rifle put together, it only weighs 8 pounds of awesomeness!  Well built and …….  Okay I will let MDT tell you more about it.  Check out what MDT has to say:

ambrose-1091-2Looking for a stock replacement for your Remington 700, Savage or Tikka T3 Bolt action rifle, turning it into a tactical and highly accurate system?

Our TAC21 Chassis system for bolt action rifles offers a combination of improved accuracy, superior ergonomics and specialized design allowing use of AR-15 butt-stocks, grips and automatically converts your rifle to an external box magazine fed rifle.

The TAC21 can be installed in 30 – 45 minutes without the need of bedding and has proven results with up to 28% accuracy improvements.

Our TAC21™ chassis system a combination of benchrest accuracy, superior ergonomics and specialized design. This chassis brings the bolt action rifles to the next level in versatility and modularity, with an instant improvement in accuracy.

The chassis system is manufactured out of billet 6061-T6 aluminum, which has been hard anodized to mil spec type III for extra strength, and has been finished with Cerakote™ in Black or Flat Dark Earth (FDE).

TAC21™ chassis is engineered to minimize warping and distortion. The rifle receiver only makes contact with the TAC21™ chassis on the V shape bedding and recoil lug area insuring the best accuracy and repeatability. The generous clearance on the fore-end makes any barrel (diameter up to the receiver size – 1.350”), free floating.

TAC21 End CapThe end cap features a quick release lever which is tightly locked in place, allowing quick removal of the buttstock and bolt.

Inherently the TAC21™ has a straight-line design, meaning that the recoil comes straight back instead of making the front of the rifle kick upwards. This results in more accurate and quicker follow up shots. This also translates to a decrease in felt recoil and comfort.


The TAC21™ chassis system is currently manufactured for the following bolt action rifle platforms:

  • Remington 700 Short Action (.223 and .308 bolt faces)
  • Remington 700 Long Action (.300WM, .338LM, 7mm, 30.06)
  • Savage Short Action, Models 10, 11, 12 and 16 (.223 and .308 bolt faces)
  • Savage Long Action, Models 110, 111, 112 and 116 (.300WM and .338LM)
  • Tikka T3 – Short Calibers (.223 and .308 bolt faces)
  • Tikka T3 – Long Calibers (.300WM, 6.5×55, 7mm, 30.06). Requires MDT 3.560 Magazine.
TAC21 Fore end mountingSlightly offset tapered holes ensure the fore end is pulled tight against the action housing


The TAC21™ chassis is designed to accept any AR-15 butt-stock and pistol grip (purchased separately), offering the option to customize from the wide variety of  Accessories available on the market.

The TAC21™ chassis uses external box style magazines in .223 and .308 caliber for Short Action and .300WM or .338LM magazines for Long Action rifles, and supports installation of bolt on MIL-STN-1913 accessory mounting rails on the fore-end and side of the action housing. Mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”).

With a top full length MIL-STN-1913 accessories mounting rail. The built-in mounting rail has 20 MOA (Minutes of Angle) on the action housing and is parallel to the barrel axis on the fore-end.

TAC21 Sling Swivel StudFore end has sling swivel stud installed, which can be removed to install a rail for rail mounted bipods.

Note: Long action magazines come in 3 different lengths: 3.715″, 3.775″ an 3.850″. Our chassis use 3.715 magazines. If you purchased the Remington 700 Tactical Chassis Rifle, the magazine well is 3.775.


  • Increases accuracy by up to 28%
  • CNC Machined from 6061 aluminum
  • Cerakote Finish in Black or Flat Dark Earth
  • 20 MOA built in top rail
  • Hole spacing for Magpul L5(11slot) and L3(7slot)Rails
  • Lightweight, free-floating modular fore-end
  • Will accommodate barrels as thick as the action
  • Compatible with AICS style magazines in .223 or .308 (SA) and 300WM, 30.06, 338LM (LA). (Long Action Magazine length 3.715)
  • Weight: 3lb – 3.6lb

Man!  This company is rock stars when it comes to knowing what you need for yourambrose-1099 rifle!  Customer service will help you if you do not know what you need for a rifle system as well as putting you on the right track.  Take the time to research this company like I did and you will be ordering from them in no time.  Check out their website!  Until next time………….

Click here for the TAC21



Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s